© Copyright 2010 ASAN Security Technologies Oy
www.asansecurity.com
1. Add the
IP -address range
you want
to scan the devices from. The
default is the subnet of the
ASANTech NVR.
2. Add the user name /password -
combinations under
Authentications
for the desired
devices. Several credentials may be
added.
3. Click the
Scan
-button. The scanning
will last about 1 - 2 minutes
depending on the chosen address
range (defined in step 1). The
maximum number of addresses is
255, a C-class block.
4. Select the cameras you would like
to add to the ASANTech NVR by
using the mouse and CTRL and
SHIFT buttons.
5. Click
Add Selected
to configure the
chosen IP -devices to the ASANTech
NVR.
Recorder settings: Scanning for devices on the network
1
2
3
5
4
• The
Device scanner
helps you find the IP -devices on the network,
if you do not have their IP -addresses readily available, or if you
want to add devices easily to the NVR.
13