GigaNIX Installation
4
Version 2.0
GigaNIX 1000T User Manual
GigaNIX Installation
GigaNIX Installation on a G3 or G4 Platform
Preparing your workstation to join the Gigabit Ethernet Network is a straight-
forward process involving only three basic steps:
1) Installing the GigaNIX Card and Software The GigaNIX card is specially
designed for easy plug-and-play installation. There are no user configurable
jumpers, or settings. Installation is accomplished by simply opening up your Mac,
locating an empty PCI slot, and plugging the GigaNIX card into it.
2) Connecting the GigaNIX to a Gigabit Ethernet Network A Macintosh
workstation can be installed into a Gigabit Ethernet network or other Macs using
several types of cable and interconnection schemes as described later in this chapter.
3) Activating the Gigabit Ethernet Interface After all the hardware and software is
installed, a simple procedure is required to activate the Gigabit Ethernet interface for
use.
After successful completion of the steps in this chapter, you will be able to use your
new GigaNIX Gigabit Ethernet Interface to communicate over any Gigabit Ethernet
Network.
Apple Power Macintosh, G3/G4 Board Installation Procedure
This manual describes installation in Apple G3 and G4 model computers. Older
platform case designs may require a slightly different installation procedure. If in
doubt, consult the User Guide for each machine.
Note:
Not all Power Macintosh Computers have a PCI Slot. The user should consult the
Reference Manual that came with the Mac for more information before attempting
installation. If the machine does have PCI capabilities, insure there is at least one
open PCI slot.
Power down the Macintosh Workstation & peripherals. Turn off power to the
Macintosh workstation and all attached peripheral devices, and remove the power
cable.
