Installing the Mac OS 8/9 Driver
10
Version 2.0
GigaNIX 1000T User Manual
Select Folder for Installation — You may select the folder where the GigaNIX
folder and the GigaNIX control application will be placed. If you choose not to
select the location of the GigaNIX folder then the folder will be placed at the root
level of the active system drive.
Select the Install Button — Click on the install button to finish the install process.
If there are any active applications open the following window will appear. At
this point you may choose to continue in which case any active application will be
shutdown.
Restart the computer — The installation process is complete click on the restart
button to reset and restart your computer.
.
After installation of the software and restart of the computer, the GigaNIX Gigabit
Ethernet interface card and driver software must be activated for use. Unless you
radically change your Mac’s setup, this procedure will only have to be performed
once. After that, your Mac will be able to locate and activate the interface
automatically whenever you reset or power-up your machine.
