![background image](http://html1.mh-extra.com/html/asaklitt/31-6100/31-6100_manual_2980280008.webp)
8
E
n
gli
s
h
Resetting the computer to factory default settings
The computer resets if:
-
The battery is removed.
-
The [SET] and [MODE] buttons are held in together for 5 seconds.
.
Automatic shut-off
The computer shuts off automatically after 5 minutes of inactivity and only the time and date are
displayed. Pressing any key will turn the computer on again.
Care and maintenance
•
The computer and sensor can be cleaned by wiping with a dry cloth.
•
Whenever the computer and sensor are not to be used for a long time, the batteries should
be removed and they should be stored in a dry, dust-free environment, out of children’s
reach.
•
The distance between the sensor and the computer should be checked regularly.
Troubleshooting guide
No current speed reading.
Check the gap between the magnet and sensor.
Display screen black.
•
The temperature is too high.
•
The display has been exposed to sunlight for
too long.
The characters on the display are weak.
•
Check the batteries in the sensor and the
computer and make sure that they are
correctly inserted.
•
Replace the batteries if necessary.
The speed and distance travelled are not
displayed.
•
Check the gap between the magnet and
sensor.
•
Check the batteries in the sensor and the
computer and make sure that they are
correctly inserted.
•
Replace the batteries if necessary.
Irregular characters appear on the display.
Remove the battery and insert it again
The computer resets or shows incorrect
data due to external interference from a
mobile phone or other electronic product.
•
Move the cause of the interference away
from the cycle computer.
•
Remove the battery from the computer and
insert it again.