ArWest alphawave AW400, User Manual, Page: 30 / 44

Command Line Interface
Special Commands
BOOT
30 www.arwestcom.com
Note:
ArWest Communications radio modem’s does not support data flow and parity on the maintenance serial
port.The radio modem with none-dedicated maintenance serial port must keep CTS line always active in
MPORT mode (DP/MP is low).
3.4. Special Commands
3.4.1. BOOT
The factory software image and default configuration is set for the new unit. The BOOT command is
intended to reboot the unit using specified software image and selected configuration.
BOOT [Parameter Name] [Parameters List] [/?]
The BOOT command with no parameters selects the user settings defined by the prior “parameterized”
BOOT commands.
3.4.2. HELP
The HELP command types the list of all available commands:
HELP – Display this usage
BOOT – Reboot the unit
LINK – RF Link Operation Mode
DPORT– Data Port Configuration
MPORT – Maintenance Port Configuration
ALARM – Alarm Indication and Alarm Control Configuration
SLEEP – Sleep Mode Configuration
CONNECT – Connect to Specified Unit
STATE – Display Status and Statistics
SAVE– Save Current Configuration into Configuration File
INFO – Display Product ID along with Hardware/Software Versions
DATAMODE – Exit Maintenance Mode
[COMMAND] /? – Display Command Usage
Parameter Name Parameter List
IMAGE 0 - selects the factory loaded real-time software/firmware image
1 - selects the user updated real-time software/firmware image
CFG 0 - selects the factory default configuration
1 - selects user modified configuration