46
| Specifications, Safety, and Compliance
Aruba S3500 Series Wired Access Point
| Installation Guide
Uplink Module Specifications
Physical
Module Dimensions
9.38”x 3”
23.8 cm x 7.6 cm
Module Weight: 0.8 lbs. (0.37 Kg)
Operating Specifications
Operating Temperature Range: 0°C to 40°C (32°F to 104°F)
Operating Humidity Range: 5% to 95% (RH), non-condensing
Storage Specifications
Storage Temperature Range: 0°C to 50°C (32°F to 122°F)
Storage Humidity Range: 5% - 95% (RH), non-condensing
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains country-specific restrictions and
additional safety and regulatory information for all Aruba products. This document can be viewed or
downloaded from the following location:
www.arubanetworks.com/safety_addendum
This product complies with 21 CFR Chapter 1, Subchapter J, Part 1040.10, and IEC 60825-1: 1993, A1: 1997,
A2: 2001, IEC 60825-2: 2000.
For continued compliance with the above laser safety standards, only approved Class 1 modules from our
approved vendors should be installed in the product.
Electromagnetic Interference
United States
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
Aruba wired access points must be installed by a professional installer. The professional installer is responsible for
ensuring that grounding is available and it meets applicable local and national electrical codes.
CLASS 1
LASER PRODUCT
Use of controls or adjustments of performance or procedures other than those specified in this manual may result in
hazardous radiation exposure.
