Aruba S3500 Series Wired Access Point
| Installation Guide
Uplink Module and Stacking |
37
Direct Attach Cables
Direct attach cables (DACs) are used to connect one S3500 with another when forming a stack. DACs are
installed in an uplink module in the same manner as an SFP module, using the 10GBASE-X Ports. For
information on how to install an SFP or a DAC, see
“Installing an SFP” on page 39
. For a list of DACs
available through Aruba, see
Table 23
.
SFP-10G-SR
Aruba SFP+, 10GBASE-SR, 850nm serial
pluggable SFP+ optic, LC Connector
SFP-10G-LR
Aruba SFP+, 10GBASE-SR, 1310nm serial
pluggable SFP+ optic, LC Connector
Table 23
Direct Attach Cables
DAC
Description
SFP+, Direct Attach, 0.5M
50cm Direct Attach Cable; 10G SFP+ for stacking
SFP+, Direct Attach, 1M
1m Direct Attach Cable; 10G SFP+ for stacking
SFP+, Direct Attach, 3M
3m Direct Attach Cable; 10G SFP+ for stacking
SFP+, Direct Attach, 5M
5m Direct Attach Cable; 10G SFP+ for stacking
SFP+, Direct Attach, 7M
7m Direct Attach Cable; 10G SFP+ for stacking
Table 22
Supported SFPs
SFP
Description
