26
| Installation
Aruba S3500 Series Wired Access Point
| Installation Guide
4. Mount the mobility access switch within your organization’s rack system using four (two per bracket)
M6 x 15mm phillips flat head screws and suitable screwdriver (see
Figure 14
).
Figure 14
Rack Mount Installation
5. Leave a minimum of four inches (10cm) of space on the left and right side of the unit for proper air flow
and ventilation. See
Figure 11 on page 19
for more information about the S3500’s airflow requirements.
6. Leave additional space in front and back of the unit to access power cords, network cables, LCD panel,
and LED status indicators
