Aruba S3500-24P, Installation Manual

Page: 23 / 48

Aruba S3500 Series Wired Access Point | Installation Guide Installation | 23
Chapter 2
Installation
This chapter describes how to install an Aruba S3500 mobility access switch using the many mounting
options available. The S3500 ships with an accessory kit that includes the equipment required to install the
mobility access switch in standard, two-point 19-inch telco rack. Additional mounting options are sold
separately.

“Precautions” on page 23

“Selecting a Location” on page 24

“Two-Point Rack Mounting” on page 25

“Four-Point Rack Mounting” on page 27

“Table or Shelf Installation” on page 30

“Connecting the AC Power Cord” on page 30

“Installing and Removing a Fan Tray” on page 31

“Installing and Removing a Power Supply” on page 32
Precautions

Ensure that the rack is correctly and securely installed to prevent from falling or becoming unstable.

Dangerous voltage in excess of 240VAC is always present while the Aruba Power Supply Module is
plugged into an electrical outlet. Remove all rings, jewelry, and other potentially conductive material
before working with this product.

Never insert foreign objects into the chassis, the power supply, or any other component, even when the
power supplies have been turned off, unplugged, or removed.

Main power is fully disconnected from the S3500 by unplugging all installed power supplies’ power
cords from their outlets. For safety, verify the power outlets and plugs are in easy reach of the operator.

Do not handle electrical cables which are not insulated. This includes any network cables.

To minimize electrical hazard, keep water and other fluids away from the product.

Comply with electrical grounding standards during all phases of installation and operation of the
product. Do not allow the S3500 chassis, network ports, power supplies, or mounting brackets to
contact any device, cable, object, or person attached to a different electrical ground. Also, never connect
the device to external storm grounding sources.

Installation or removal of the chassis or any module must be performed in a static-free environment. The
proper use of anti-static body straps and mats is strongly recommended.

Modules must be kept in anti-static packaging when not installed in the chassis.

Do not ship/store this product near strong electro- magnetic, electrostatic, magnetic or radioactive
fields.

Do not disassemble the chassis or any module.
Installation of the device should be performed by a trained installation professional.