30
| Installation
Aruba 9004-LTE Gateway
| Installation Guide
Figure 32
Mounting the LTE Antenna on the Bracket
9. Route the cable along the wall using required methods to ensure safety of the mounted antenna.
Ensure that the antenna orientation is upright. See
Figure 33
.
Figure 33
Antenna Mounting
The antenna mounting is now complete.
Installation Steps - Vertical
To install an LTE antenna to the wall using a 20 feet or a 40 feet cable, perform the following steps:
1. Remove the connector caps from the LTE antenna connectors and secure the extension cable with
the LTE connector on the device. See
step
1 on page 28
through
step
3 on page 29
for details.
2. Mark the screw hole locations on a wall by aligning with the mounting holes provided in the
mounting brackets for vertical orientation.
3. Align the mounting bracket to the screw hole on the wall. Secure the bracket with the screws on
the wall. See
Figure 34
.
