Aruba 9004-LTE Gateway
| Installation Guide
Installation |
23
4. Pass one end of the rubber clamp through the DC cable of the adapter. Pass the power cable plug
through the other end of the rubber clamp before attaching it with the adapter. See
Figure 19
.
Figure 19
Attaching Rubber Clamp to the DC Power Adapter
5. Place the power adapter on the rack mount tray aligning it with the placement tabs provided. See
Figure 20
.
Figure 20
Power Adapter Mounting
6. Use the other rubber clamp provided with the mounting kit to secure the adapter on the rack
mount tray. Hook one end of the clamp into the left hook provided on the tray, pull the other end
and hook it to the right hook provided on the tray to secure the adapter completely. See
Figure 21
and
Figure 22
.
Leave a minimum of 10 cm (4 inches) of space on the left and right side of the device for proper air flow and
ventilation.
Leave additional space in the front and the back of the device to access network cables, LED status indicators, and
power cord.
