Aruba 800-E
3
Installation Guide
System Overview
Chapter 1
GE uplink port
This uplink port is used for high-speed connection to the wired LAN. The port
provides 1000 Mbps Gigabit Ethernet connection. Depending on the option
selected at time of purchase, one of the following interfaces is available:
1000BASE-T copper connector (standard model HW-800-CHAS-SPOE-T)
1000BASE-SX fiber-optic connector (optional model
HW-800-CHAS-SPOE-SX)
See
for port, LED, and cable specifications.
N
OTE
:
The Gigabit interface is not user-replaceable. Do not remove the port
cover plate.
Serial Console port
This port is for connecting a local management console. It is required to access
the text-based Command-Line Interface (CLI) for initial configuration of the 800-E
Access Multiplexer. The CLI can also be used for switch management and
troubleshooting.
The port accepts an RS-232 serial cable, an RJ-45 male connector. See
for more port and cable specifications.
See the
ArubaOS User’s Guide
for information on using the features available
through this port.
Fans/heat exhaust (on side)
Three independent fans promote proper air circulation for cooling the 800-E
Access Multiplexer.
During operation, the air vents on the left and right sides of the chassis must
remain unobstructed by cables or mounting equipment. For proper air circulation,
leave at least 10 cm (4 inches) of clearance on the left and right of the chassis.
Holes for attaching rack mounting brackets (on side)
Power Input Socket (on back)
The power input socket on the back of the switch accepts a power cord with a
standard IEC320 connector. For proper safety and performance, the power cord
must be rated to 10 A and conform to grounded electrical standards in the
country where the product is operated.
C
AUTION
:
This model uses a laser transceiver on the fiber-optic
uplink port. Use of controls or adjustments of
performance or procedures other than those specified
herein may result in hazardous radiation exposure.
3
4
5
6
7
Summary of Contents for 800-E
Page 1: ...Aruba 800 E Access Multiplexer Installation Guide...
Page 12: ...System Overview Chapter 1 4 Aruba 800 E 0500191 Installation Guide November 2005...
Page 22: ...Installing the Chassis Chapter 2 14 Aruba 800 E 0500191 Installation Guide November 2005...
Page 40: ...Troubleshooting Chapter 5 32 Aruba 800 E 0500191 Installation Guide November 2005...