Arturia Moog Modular V User Manual Download

Page: 141 / 155

ARTURIA – MOOG MODULAR V – USER’S MANUAL

141

The preset “Pads / Env_Follow”

►

To modify this wave form, we will connect the result of the mixing of the 3 oscillators as source

of modulation to the input of the envelope follower. Click on the audio out of the first VCA (going

from the left).

►

Turn the “Time Follower” potentiometer (below the “Threshold” potentiometer) to modify the

amplitude.

7.4.3

The sample and hold

The Moog sample and hold module was only introduced on the last modular systems (1974). It is wi-

dely used for the creation of random modulations (the famous sounds from R2D2 in Star Wars were

created in this manner!).

It can also be used for more rhythmic cyclic modulations.

Summary of Contents for Moog Modular V




























































































































































Search results

Summary of Contents for Moog Modular V

Reviews:

Related manuals for Moog Modular V

Brands by name

Popular brands

Arturia Moog Modular V, User Manual

Search results

Summary of Contents for Moog Modular V

Reviews:

Related manuals for Moog Modular V

Brands by name

Popular brands