Arturia Moog Modular V, User Manual

Page: 62 / 155

62 ARTURIA – MOOG MODULAR V – USER’S MANUAL
Creating a new cable and finding an appropriate input, by click and drag
Another means is to right click (for Macintosh: click while holding shift on the keyboard) on the in-
put or output of a module. In this case, a menu appears with a list of possible connection points for
this output/input. It can happen that the input/output is already connected to certain modules, and
in this case, the already selected connection points appear in the menu. Simply select one of the
connection points in the “Connect to” menu to create a connection. It is also possible to delete all
of the connections by choosing the “Remove connections” option or delete one of the connections
by clicking on it in the menu.
Input/output connection menu appears after a right click (or Shift + click)
Remark: The module inputs can only be connected to one output connector. On the other hand, each output connector can
be connected to any number of input connectors, which allows, for example, the use of the same modulation signal to mod-
ify several synthesis settings.
4.4.2 Modifying a connection
To disconnect the extremity of a cable at input connector level, and reconnect it to another input,
click on the extremity of the cable concerned and hold down the mouse button. You can now drag
the extremity of the cable to another input with the mouse and release the button.