Arturia DrumBrute User Manual Download

Page: 81 / 81

10. DECLARATION OF CONFORMITY

USA

Important notice: DO NOT MODIFY THE UNIT!

This product, when installed as indicate in the instructions contained in this manual, meets

FCC requirement. Modifications not expressly approved by Arturia may avoid your authority,

granted by the FCC, to use the product.

IMPORTANT: When connecting this product to accessories and/or another product, use only

high quality shielded cables. Cable (s) supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void your FFC authorization to

use this product in the USA.

NOTE: This product has been tested and found to comply with the limit for a Class B

Digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

a reasonable protection against harmful interference in a residential environment. This

equipment generate, use and radiate radio frequency energy and, if not installed and used

according to the instructions found in the users manual, may cause interferences harmful

to the operation to other electronic devices. Compliance with FCC regulations does not

guarantee that interferences will not occur in all the installations. If this product is found to

be the source of interferences, witch can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the following measures:

• Relocate either this product or the device that is affected by the interference.

• Use power outlets that are on different branch (circuit breaker or fuse) circuits or

install AC line filter(s).

• In the case of radio or TV interferences, relocate/ reorient the antenna. If the

antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial cable.

• If these corrective measures do not bring any satisfied results, please the local

retailer authorized to distribute this type of product. If you cannot locate the

appropriate retailer, please contact Arturia.

The above statements apply ONLY to those products distributed in the USA.

CANADA

NOTICE: This class B digital apparatus meets all the requirements of the Canadian

Interference-Causing Equipment Regulation.

AVIS: Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur

le matériel brouilleur du Canada.

EUROPE

This product complies with the requirements of European Directive 89/336/EEC

This product may not work correctly by the influence of electro-static discharge; if it

happens, simply restart the product.

Arturia - User Manual DrumBrute - Declaration of Conformity

Summary of Contents for DrumBrute


















































































Search results

Summary of Contents for DrumBrute

Reviews:

Related manuals for DrumBrute

Brands by name

Popular brands

Arturia DrumBrute, User Manual

Search results

Summary of Contents for DrumBrute

Reviews:

Related manuals for DrumBrute

Brands by name

Popular brands