8.8.4.4. Event velocity
If you hover over the top of an event you will see the cursor become a vertical arrow icon.
Drag the cursor up and down to change the velocity of that event to a value between 1 and
127.
The color of the selected event will change to indicate the velocity value: white is the lowest
velocity value and red is the highest velocity value.
When the velocities of multiple events are edited at the same time they will all change to the
same value.
8.8.4.5. Shift Timing
The shift timing feature was described more fully in
section [p.38]
. In this section we will
show how to use this feature inside the MCC Pattern window.
To shift the timing of an event, hold the Shift key on your computer keyboard and then click
on an event.
Drag the cursor left and right to change the time shift value of that event. The range is from
-/+50%. A small window will appear and show the current time shift value.
Shift timing value of -17% applied to an event.
In the image above the Kick 1 drum has two events that are not shifted, while the third event
has been shifted ahead of the beat by a value of -17%.
Note
Shift timing is measured in terms of percentage of the pattern’s time division setting. It is not
shifted by a fixed unit of time (msec, pulses, clocks, etc.).
It is also possible to shift the timing of several events at the same time, even events from
different instrument tracks.
Three events s28%
In the image above three Hat events from two tracks have been shifted “late” by a value of
28%.
65
Arturia - User Manual DrumBrute - MIDI Control Center
Summary of Contents for DrumBrute
Page 1: ...USER MANUAL...
