10
Controls
reMote ir control
Power
Switch ON/OFF the monitor
Menu
Activates the OSD menu on screen
uP
Cursor control up on the OSD menu
down
Cursor control down on the OSD menu. When
the OSD menu is not active on screen, selects
the input source
left
Cursor control left on the OSD menu
rigHt
Cursor control right on the OSD menu
oK
Selects the function on the OSD menu
Monitor address
Below the monitor, there is a screen to configure the monitor. Press the UP
or DOWN buttons to change the function. Press the OK button to select the
function. Change the parameter using the UP or DOWN buttons and press
OK again to save the changes.
aHnet id
Selects the number AHnet ID to RS422 to externally control
the monitor
input select
Selects the input source signal (DVIA, DVI1 or DVI2)
Brightness
Configuration of the monitor brightness level
contrast
Configuration of the monitor contrast level
Backlight
Configuration of the monitor backlight level
status information
List of the monitor status to service
