9
Preparation for Installation
Follow the next steps to pack the device for a safe shipment:
Permanent press button 1 until the monitor housing gets released from the
frame. Insert the two plastic screws (M8x30) entirely. To close the monitor,
permanent press button 2 until the monitor housing touches the two plastic
screws.
The next step is to insert the two lateral plastic screws (M8x30). Starting
by the right hand side, turn the plastic screw into the frame until it touches
the aluminium housing; without moving the aluminium housing (very fine
tolerances). Next, insert the plastic screw into the left side by turning it until
it touches the aluminium housing.
Dynamic3 with cover plate
Dynamic3 with external
control buttons
