16
Basic Operation — Continued
The signal type, input terminal name and resolution can be
displayed and confirmed.
Display occurs when the following operation is performed.
●
When [INPUT] is pressed
●
When the signal is present
●
When power is turned “On”
Note
●
When there is no input signal, and when an unsupported
signal is input, “No Signal” and “Not Supported” are
displayed.
Regarding displayable signals, see “Displayable Input
Signals” on page 31 for details.
●
Display time will vary according to “Status Display” of
“System Config”. (page 27)
Select operation target screen in subscreen display.
Repeatedly press [W.SEL], and then select the
operation target screen
During screen selections, the frame is displayed around the
selected screen.
Note
●
In the selection frame display, if there is no operation for
about 5 seconds the selected frame disappears.
Confirming the Input Signal
VIDEO
NTSC
Input terminal name
When 1 screen
Signal type
E.g.: When video signals are input
HD15
1280x1024@60
DVI-D 1
1080-60p
Resolution (horizontal dot
number X vertical dot
number@vertical
frequency)
When 2 screens
E.g.: When PC image is input
RGB/YP
B
P
R
720-60p
SDI
No Signal
HD15
Not Supported
When there is no signal,
“No Signal” is displayed.
When there is an
unsupported signal, “Not
Supported” is displayed.
When 3 screens
Switching Operation Target Screen
A
B
A
B
A: Main screen
B: Subscreen
E.g.: When 2 screens
A
B
C
A
B
C
A
B
C
A: Main screen
B: Subscreen 1
C: Subscreen 2
E.g.: When 3 screens
EJ-MLA26_EN_Arthrex.book Page 16 Wednesday, August 8, 2012 11:58 AM
