manualshive.com logo in svg

Artesyn Embedded Technology MVME7100ET, Programmer'S Reference Manual

Share
Download
Artesyn Embedded Technology MVME7100ET Programmer'S Reference Manual Download Page 61

Programming Details

MVME7100ET Single Board Computer Programmer’s Reference (6806800K88B)

61

4.6

User Configuration EEPROM

The board provides two 64 KB dual address serial EEPROMs for a total of 128 KB user 
configuration storage. These EEPROMs are hardwired to have device IDs as shown in 

Table 4-4 

on page 60

, and each device ID will not be used for any other function. Refer to the 

EEPROM 

Datasheet

 listed in 

Appendix B, 

Related Documentation

, for additional details.

4.7

VPD EEPROM

The MVME7100ET board provides an 8 KB dual address serial EEPROM containing Vital Product 
Data (VPD) configuration information specific to the MVME7100ET. Typical information that 
may be present in the EEPROM may include: manufacturer, board revision, build version, date 
of assembly, memory present, options present, L2 cache information, and so on. The VPD 
EEPROM is hardwired to have a device ID as shown in 

Table 4-4 on page 60

. Refer to the 

EEPROM 

Datasheet

 listed in 

Appendix B, 

Related Documentation

, for additional details.

4.8

RTM VPD EEPROM

The MVME7100ET RTM provides an 8 KB dual address serial EEPROM containing VPD 
configuration information specific to the MVME7100ET RTM. Typical information that may be 
present in the EEPROM may include: manufacturer, board revision, build version, date of 
assembly, options present, and so on. The RTM VPD EEPROM device ID is user selectable with 
the recommended value for MVME7100ET as shown in 

Table 4-4 on page 60

. Refer to the 

EEPROM Datasheet

 listed in 

Appendix B, 

Related Documentation

, for additional details.

4.9

Ethernet PHY Address

The assigned Ethernet PHY addresses on the MC864xD MII management (MIIM) bus is shown 
in the following table. Need new table data.

Table 4-5 PHY Types and MII Management Bus Addresses 

MC864xD 
Ethernet Port Function/Location

PHY Types

PHY MIIM Address 
[4:0]

TSEC1

Gigabit Ethernet port 1 routed to front 
panel

BCM5482SH

01

Summary of Contents for MVME7100ET



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands