Artesyn Embedded Technology MVME7100ET, Programmer'S Reference Manual

Page: 59 / 98

Programming Details
MVME7100ET Single Board Computer Programmer’s Reference (6806800K88B)
59
4.4 Local Bus Controller Chip Select Assignments
The following table shows local bus controller (LBC) bank and chip select assignments for the
MVME7100ET board.
1. Flash bank size determined by VPD flash packet.
2. Control/Status registers are byte read and write capable.
3. 32-bit timer registers are byte readable, but must be written as 32 bits.
Table 4-3 LBC Chip Select Assignments
LBC Bank / Chip
Select
Local Bus Function Size Data Bus Width Notes
0 Boot flash bank 128 MB 32 bits 1
1 Boot flash bank 128 MB 32 bits 1
2 NAND flash bank 64 KB 8 bits
3 MRAM 512 KB 16 bits 4
4 Control/status
registers 64 KB 32 bits 2
5 Quad UART 64 KB 8 bits
6 32-bit Timers 64 KB 32 bits 3
7 Not Used