Artel Hydro Insert 17, Manual

Page: 1 / 46

1
EN
Dear Customer,
We thank you for having chosen one of our products, the fruit of technological experience and of con-
tinual research for a superior quality product in terms of safety, dependability, and service.
In this manual you will nd all the information and useful suggestions to use your product with the
maximum safety and ef ciency.
• Incorrect installation, incorrectly performed maintenance, improper use of the product release the man-
ufacturer from every eventual damage derived from the use of the Hydro Insert.
• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• This manual has been realized by the manufacturer and constitutes an integral part of the product and
must remain with it during its entire lifetime. If the product is sold or transferred, be sure that the booklet
is present since the information contained in it are addressed to the buyer, and to all those persons of
various titles who complete the installation, use and maintenance.
• Carefully read the instructions and the technical information contained in this manual, before proceed-
ing with the installation, use, and any operation on the product.
• The observance of the indications contained in the present manual guarantees the safety of people and
the product, the economy of use and a longer functioning lifetime.
• Although the carefully studied design and the risk analysis done by our company has permitted the
realization of a safe product, in any case, before effecting any operation on the Hydro Insert, it is recom-
mended to keep said manual available and pay scrupulous attention to the instructions written therein.
• Be very careful when moving the ceramic details where present.
• Check the precise atness of the pavement where the product will be installed
• The wall where the product will be placed must not be constructed in wood, or in any case, made of an
in ammable material, and in addition it is necessary to maintain a safety distance.
• While the Hydro Insert is in operation, several parts of the Hydro Insert (door, handle, sides) can reach
high temperatures. Therefore pay attention and use the proper precautions, above all in the presence of
children, elderly or disabled persons, and animals.
• Assembly must be performed by authorized persons (Authorized Assistance Center).
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the intent
of pursuing a policy of constant development and renewal of the product can, without any notice, make
any modi cations that are believed opportune.
• When the Hydro Insert is working at its maximum speed, it is strongly suggested to wear gloves while
handling with the door for pellets loading and the door handle.
• It is prohibited to install in bedrooms or in explosive environments.
• Only use replacement parts recommended by the supplier.
In the event of a re, disconnect the power supply, use an extinguisher and call the re ght-
ers if necessary. After that contact the Authorized Assistance Center.
Never cover the body of the Hydro Insert in any way or obstruct the openings
placed on the upper side when the device is operating. All our Hydro Inserts are
trial lighted on the construction line.
This instruction booklet is an integral part of the product: make sure that it always accompanies the
appliance, even in case of transfer to another owner or in the case of transfer to another place.
In the
event of damage or loss, request a copy from the area technician.
Hydro Insert 17/25
Cod. 001111
We highly recommend to turn to our Authorized Service Centre for the installation
and the rst ignition of the device as it not only carries out the installation
perfectly but also veri es the regular operation of it.