2
EN
Our company declares that the Hydro Insert
conforms to the following norms for the EC
European Directive labelling:
• 2014/30 UE (regulation EMCD) and following
amendments;
• 2014/35 UE (Low Voltage Directive) and following
amendments;
• 2011/65 UE (RoHS 2 directive);
• The rules of Construction Products (CPR-
Construction Products Regulation) No. 305/2011
regarding the construction world;
• For installations in Italy, please refer to UNI
10683/98 or following changes. For the water-
thermo-sanitary equipment, let the installer give
you the conformity declaration in compliance with
L. 37/2008. While installing the unit respect the
local, national and Europen rules;
• EN 55014-1; EN 55014-2; EN 61000-3-2; EN
61000-3-3; EN 60335-1; EN 60335-2-102; EN
62233, EN 50581.
Safety information
Please carefully read this use and maintenance
manual before installing and operating the Hydro
Insert!
If clari cation is needed, please contact the dealer
or the Authorized Assistance Center.
• The pellet Hydro Insert must only be operated
in living environments. This Hydro Insert, being
controlled by an electronic board, permits a
completely automatic and controlled combustion;
the exchange, in fact, regulates the lighting
phase, 5 power levels and the shut down stage,
Norms and declarations of conformity
guaranteeing the safe operation of the Hydro
Insert.
• The basket used for combustion allows most
of the ash produced by the combustion of the
pellets to fall into the collection compartment.
Nevertheless, check the basket daily, given
that not all pellets have high quality standards
(use only quality pellets recommended by the
manufacturer).
Responsibility
With the delivery of the present manual, we decline
all responsibility, both civil and penal, for accidents
deriving from the partial or total lack of observance
of the instructions contained herein.
We decline every responsibility derived from
improper use of the Hydro Insert, from incorrect
use by the user, from unauthorized modi cations
and/or repairs, from the use of replacement parts
that are not original for this model.
The manufacturer declines every civil or penal,
direct or indirect responsibility due to:
• Lack of maintenance;
• Failure to observe the instructions contained in
the manual;
• Use in non-conformity with the safety directives;
• Installation in non-conformity with the norms in
force in the country;
• Installation by unquali ed or untrained personnel;
• Modi cations and repairs not authorized by the
manufacturer;
• Use of non-original replacement parts;
• Exceptional events.
ATTENTION: This warning sign indicates that the message to which it refers should
be carefully read and understood, because failure to comply with what these notices
say can cause serious damage to the Hydro Insert and put the user’s safety at risk.
INFORMATION: This symbol is used to highlight information which is important
for proper Hydro Insert operation. Failure to comply with these provision will
compromise use of the Hydro Insert and its operation will not be satisfactory.
These symbols indicate speci c messages in this booklet:
Summary of Contents for Hydro Insert 17
Page 46: ...46 EN NOTES Cod 001111...
