Artel Hydro Insert 17, Manual

Page: 6 / 46

6
EN
It is recommended that the control of emissions after installation.
PARAMETER M. UNITS ICPHYDRO17 ICPHYDRO25
Heat input
kW 17,6 25,6
Nominal heat output
kW 16,5 23,6
Reduced heat output
kW 7,1 8,2
Water heat output
kW 13,1 19,2
Reduced water heat output
kW 5,1 7,9
CO concentration at nominal reference (13%
O
2
)
mg/m
3
110 85
CO concentration at reduced reference (13%
O
2
)
mg/m
3
116 109
Nominal ef ciency
% 94,0 92,2
Reduced ef ciency
% 96,3 95,8
Pellet consumption (min-max)
Kg/h 1,5 - 3,6 1,69 - 5,25
Heated surface
mc 300 450
Flue gas ow rate (min-max)
g/s 5,49 - 10,80 5,85 - 13,58
Draft (min-max)
Pa 3 - 10 3 - 12
Flue gas temperature (min-max)
°C 68,8 - 115,1 82,3 - 160,6
Hydro Insert water
litri 30 30
Maximum working pressure
bar 2,5 2,5
Tank capacity
Kg 22 22
Smoke outlet tube
mm 80 80
Diameter air intake
mm 50 50
Connecting heating
Inch 3/4" 3/4"
Nominal voltage
V 230 230
Nominal frequency
Hz 50 50
Power consumption max
W 320 320
Nominal Power consumption
W 75 -58 90 - 65
Hydro Insert weight
Kg 180 180
Hydro Insert weight with base
Kg 210 210
EEI
133 131
N° Test Report
K 2330 2018 T1
Ambiental decree n.186
Energetic class
A + +
Dust at 13% O2 at nominal heat output
mg/m
3
14,9 17