DLC300 Function Module Installation and Operations Manual
21
Removing the SFPs and DLC300 Module
Removing the SFPs and DLC300 Module
You can safely remove either of the SFPs from the DLC300, or the DLC300 from the chassis while power is
applied to the module.
This section contains the following topics:
•
Removing the SFP (page 21)
•
Removing the DLC300 Module (page 21)
Removing the SFP
To remove the SFP from the DLC300, perform the following steps:
1. Remove the fiber optic cables from the SFP.
2. Pull down on the SFP handle to dislodge the SFP from the DLC300 module (see
Figure 9
).
3. Using the SFP handle, pull the SFP out of the DLC300.
Figure 9.
Removing the SFP
Removing the DLC300 Module
To remove the DLC300 from the chassis, perform the following steps:
1. Remove the fiber optic cables from the DLC300 SFPs.
2. Remove the coaxial cables from the BNC connectors.
3. Loosen the two mounting screws that secure the DLC300 to the chassis.
4. Using the two mounting screws, pull the DLC300 out of the chassis.
SFP handle
(Continued)
