10
DLC300 Function Module Installation and Operations Manual
DLC300 Function Module
Figure 4.
Configuration DIP Switches
Setting the SW1 Configuration DIP Switch
Table 3
describes the SW1 configuration DIP switch configuration options for setting the video rate. The
factory-set configuration settings are shown in bold type.
Table 3.
SW1 Configuration DIP Switch: Video Rate
Function
Selected Operation
Position
S1
S2
S3
S4
S5
S6
S7
S8
3G-SDI
Enabled: Signal type accepted.
ON
Disabled: Signal type blocked.
OFF
HD-SDI
Enabled: Signal type accepted.
ON
Disabled: Signal type blocked.
OFF
SD-SDI
Enabled: Signal type accepted.
ON
Disabled: Signal type blocked.
OFF
DVB ASI
Enabled: Signal type accepted.
ON
Disabled: Signal type blocked.
OFF
ATSC
Enabled: Signal type accepted.
ON
Disabled: Signal type blocked.
OFF
DV238
Enabled: Signal type accepted.
ON
Disabled: Signal type blocked.
OFF
Reserved
Must be ON.
ON
All others
Enabled: The
DLC300
allows all
signals not explicitly stated above
in this table.
ON
Disabled: The
DLC300
blocks all
signals not explicitly stated above
in this table.
OFF
