ARTE SOL 60, Installation & User Manual

Page: 6 / 26

I
NSTALLATION
& U
SERS
M
ANUAL
FIREPLACE
| SOL 60/70/80/90
5 | Page
3. E
NDORSEMENTS
& C
ERTIFICATIONS
3.1. Endorsement
The ARTE® fireplace you chose has been tested according to EN13229 .
3.2. Declaration of Performance CE
The constructor G. Karnoutsos & Co. declares that ARTE® fireplaces meet the requirements of the standard EN 13240 , also the product’s
performance according to the quality specifications are monitored on a permanent basis.
3.3. Features marking plate
ARTE® fireplace’s feature marking plate is located on the right side of the appliance.
4. P
ACKAGING
ARTE® is devoted in protecting the environment, so we use as much recyclable materials as possible and the least amount of packaging
materials without compromising the secure transfer of our products.
4.1. Unpacking
1.
The product will be delivered on a wooden palette which is lined with wooden side panels and top panel.
(Pic. 4.1.1)
2.
Remove the individual parts of the packaging, starting from the top and then the front, side and finally the back panel.
(Pic. 4.1.2)
3.
Carefully remove the plastic membrane and the waterproof plastic film and also all the polystyrene on the outside and inside of the
product.
4.
Unscrew the 2 screws located on either side of the product, in order to release the fireplace from the palette.
(Pic. 4.1.3)
5. Carefully pick up the product and place it on the installation point, making sure that the floor can withstand the weight of the device. If
the existing construction cannot withstand the weight of the device, a load distributing plate is necessary. Also, make sure you provide
proper insulation in case the floor is built using flammable materials.
Pic. 4.1.1 Pic. 4.1.2 Pic. 4.1.3