Arroyo Instruments TECPak 586 Series, User Manual

Page: 11 / 40

586 TECPak User’s Manual · Page 11
Name Description Factory
Default
Computer
Command
Sensor Sets the temperature
measurement sensor. Can be
Therm 100uA , Therm 10uA ,
Therm, LM335, RTD , or RTD (4-
wire) .
Therm
100uA TEC:SENS
Active
Sensor Selects sensor 1 or sensor 2 for
feedback control. 1 TEC:ACTIVESENS
T-Low Lim T-Low Lim is the lower
temperature limit. If operating in
T Mode and the actual
temperature drops below this
value, the output will be turned
off. Temperature limits not
monitored in R Mode or Ite
Mode. Limit monitoring can
also be disabled in software
(see TEC:ENAB:OUTOFF
command).
-99°C TEC:LIM:TLO
T-High Lim T-High Lim is the upper
temperature limit. If operating in
T Mode and the actual
temperature rises above this
value, the output will be turned
off. Temperature limits not
monitored in R Mode or Ite
Mode. Limit monitoring can
also be disabled in software
(see TEC:ENAB:OUTOFF
command).
125°C TEC:LIM:THI
R-Low Lim R-Low Lim is the sensor low
limit. If operating in R Mode and
the actual sensor measurement
drops below this value, the
output will be turned off. R
limits are not monitored in Ite
Mode. Limit monitoring can
also be disabled in software
(see TEC:ENAB:OUTOFF
command).
0.01k Ω TEC:LIM:RLO