Arrow RH1014-C1, Owner'S Manual & Assembly Instructions

Page: 18 / 36


Front Floor Assembly (1)

Side Floor Assembly (2)

Rear Floor Assembly (1)

Parts Needed For

Floor Frame
Step 5
SO18
The fl oor frame must be square
and level or holes will not align.
1
Assemble the four corners of
the fl oor frame using two screws at
each corner as shown. At the front
corners fasten bolts through from
the bottom with nuts on top.
2
Measure the fl oor frame diagonally.
When the diagonal measurements
are equal, the fl oor frame is square.
NOTE
If using a wood platform or
concrete slab do not fasten the
fl oor frames to your base at this
time. You will anchor the
building after it is erected.
STEP
1
10387
RIGHT
REAR
8936
Level
10387
RIGHT
FRONT
9367
STEP
2
When Diagonal Measurements
are Equal the Floor Frame
is Square.
FRONT
18