Arrow RH1014-C1, Owner'S Manual & Assembly Instructions

Page: 15 / 36

Step 2
SS15

Parts Needed For

Frame Assemblies
The main frame pieces reinforce
the walls. These piece will later be
installed at the top edge of the side
walls and the rear wall. Proceed as
follows:
1
Overlap the rear wall angle pieces
as shown in the fi gure and fasten
them together with one bolt in the
center hole.
2
Make two
side wall angles
by
overlapping the side wall angle pieces
as shown. Fasten each set together
with one bolt thru the second large
hole from the end of each part.
3
Double check the length of each
and set these pieces aside for later
use.

5986 Rear Wall Angle (2)

10391 Side Wall Angle (4)
STEP
1
STEP
2
Rear Wall Angle
118 1/8" 300,0 cm
5986
5986
10391
Side Wall Angles
157 3/8" 399,7 cm
Rear Wall Angle 118 1/8" 300,0 cm
Side Wall Angles 157 3/8" 399,7 cm (2 Assemblies)
10391
15