The roof beams join the two gables
and support the roof panels. The
main roof beam is made up of four
pieces overlapped back to back at
the center. The left and right roof
beam assemblies are made up of
two pieces.
Hint:
These pieces are force-fi tted,
so you may have to press hard to join
them together.
1
Place one end of a roof beam
inside another roof beam so that the
six holes in each piece align. Make six
sets of roof beams by repeating this
procedure.
Do not insert bolts yet.
2
Take two of the pressed-together
roof beams and join them as shown
to form the main roof beam assembly.
Hold the assembly together and
fasten with 14 bolts. Build
only one
Doubled Beam Assembly.
3
Fasten the other four pressed-
together roof beams with eight bolts
to make the left and right roof beam
assemblies.
4
Double check the length of each
and set these pieces aside for later
use.
Step 3
SS16
Parts Needed For
Roof Beam Assemblies
10386 Roof Beam (12)
10386
STEP
1
Roof Beam 159 3/8" 404,8 cm
Build
one
Doubled Main Roof
Beam Assembly for Peak in Roof
END
VIEW
159 3/8"
404,8 cm
10386
Build
four
Single Beam
Assemblies
STEP
2
STEP
3
10386
10386
10386
10386
ASSEMBLED
159 3/8"
404,8 cm
16
Summary of Contents for RH1014-C1
Page 2: ......
