Arrow RH1014-C1, Owner'S Manual & Assembly Instructions

Page: 19 / 36

1
Position
right & left corner posts
at the corners of the fl oor frame as
shown. The angled end of each post
must be placed on top of all four cor-
ners. Fasten the corner post to the
fl oor frame with two screws.
Support the corner posts with stakes
until top frames are attached.
2
Fasten the door track assembly
(holes on top) behind the top of the
front corner posts using screws. See
the fi gure.
3
Fasten the rear wall angle behind
the top of the rear posts using screws.

5284 Right Corner Post (2)

5285 Left Corner Post (2)

Door Track Assembly (1)

Rear Wall Angle Assembly (1)

Side Wall Angle Assemblies (2)
Step 6
SS19

Parts Needed For

Posts/Top Frames
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
4
Fasten the
side wall angles
be-
hind the top of the side posts using
screws. Side wall angles overlap
rear wall angle in corners.
The fl oor frame must be square
and level or holes will not align.
STEP
1
5285
STEP
3
STEP
2
STEP
4
5284
5284
5285
REAR
FRONT
SIDE
SIDE
10391
9366
Wall Angles
Must Face
Inside
Building
5986
Long Leg
On Top
Short Leg
on Bottom
Opening
Facing In
FRONT
Door Track Assembly
10391
TOP VIEW
19