180°
Remember to tighten the
cams down on ALL pieces
once completed!
Assembly Instructions
Norma Jean Sewing Machine Cabinet
Page 11
Step 11.
Attach the Leaf Support Wings (L & K)
to outside of Right and Left Sides (D & E), on right
and one Left with #7x5/8” Flathead Screws (x8).
Step 12.
With an assistant, grasp the Top and
Leaves together (top assembly) Parts A, B & C and
guide the Connecting Bolts into the corresponding
FIG. 11
FIG. 12
Now, attach the Bronze Strike Washers (x2) for the
Round Magnet to each side (D & E) with #4x1/2”
Flathead Screws (x2) (as shown In FIG. 11).
**There are 25 cams & connecting bolts.
Have you tightened all 25 cams?
holes in the Sides Parts E, D & F (as shown in FIG
12).
Turn the Cams to the tocking position.
Round Magnet
Round Magnet
#4x1/2”
Flathead Screw
x2
#7x5/8”
Flathead Screw
x4
#7x5/8”
Flathead Screw
x4
Strike
Washers
x2
D
K
L
E
C
B
A