FIG. 20
Assembly Instructions
Norma Jean Sewing Machine Cabinet
Page 15
Step 19.
Place cardboard strips around the
Platform (M) to keep the Platform square, as
shown in FIG. 18. Make sure the Platform has
Step 20.
Attach the metal left and right wings
to the Platform (M) using large silver #8x5/8”
screws (x4). The long flanges facing outward &
toward the edge of the Platform. Place screws in
pre-drilled holes on metal wings and Platform.
Step 21.
Using 2 people, a 10mm wrench and an
adjustable wrench tighten down the hex nut bolts
(x8) on the metal wings and airlift carriage. To
prevent the Platform (M) from rising up as it is
being tightened, have the second person stand on
the platform while another tightens the hex nut
bolts (x8) down. The even pressure applied will
help the platfom to not rise up. Make sure the
cabinet is on a level sewing surface. See Fig. 20.
clearance on all sides. If cardboard is too thick
use envelopes folded in half.
FIG. 18
FIG. 19
#8x5/8”
Panhead Screws
x4
M
M
