Copyright © 2014 Arrive Systems, Inc. All rights reserved.
3
COMPLIANCE INFORMATION
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party: Arrive Systems, Inc.
Address: 6737 Katella Ave., Cypress CA 90630 USA
Telephone: +1-844-427-7483 (Toll Free)
Hour of operation: 9:00- 17:00
Type of Equipment: Arrive ViewPoint 2240
Model Name: AVP-2240- LCA
This unit complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
1) this unit may not cause harmful interference, and
2) this unit must accept any interference received the
including the interference that may cause undesired
operation.
See user manual instructions if interference to radio
reception is suspected.
This Unit complies with the requirements listed in
FCC regularizations, Part 15 for Class “A” Digital
units. If you are using cardiac pacemaker, please
note that this unit can radiate radio frequency
energy in the area near the product
FCC INFORMATION (for US customers)
1.
IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in the manual, meets
FCC requirements. Modifications not expressly
approved by ARRIVE may void your authority
granted by FCC to use the product.
2.
IMPORTANT: When connecting this product to
accessories and/or another product, use only
high quality shielded cables. Cable/s supplied
with this product MUST be used. Follow all
installation instructions. Failure to follow
instructions could void your FCC authorizations
to use this product in the USA.
3.
NOTE: This has been tested and found to comply
with the requirements listed in FCC regulations,
Part 15 for Class “A” digital units. Compliance
with these requirements provides a reasonable
level assurance that your use of this product in a
residential environment will not result in harmful
interference with other electronic units. This
equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the user manual, may cause
interference harmful to the operation of other
electronic units.
Compliance with FCC regulations does not
guarantee that the interference will not occur in
all installations, If this product is found to be the
source of interference ,which can be determined
by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the
following measures;
Relocate either this product or the unit that is
being affected by the interference.
Utilize power outlets that are on different
branch (circuit breaker of fuse) circuits or install
AC line filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is
300 ohm ribbon lead, change the lead-in to co-
axial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local
retailer authorized to distribute this type of
product. If you cannot locate the appropriate
retailer, please contact Arrive Systems, Inc.
Address: 6737 Katella Ave., Cypress CA 90630
USA
The above statements apply ONLY to those
products distributed by Arrive Systems, Inc.
FOR CANADIAN CUSTOMERS
This Class A digital apparatus complies with Canadian ICES-003.
CE Declaration of Conformity (For EU Customers)
We, Arrive Systems, Inc., declare under our sole responsibility that the Arrive component to which this declaration
relates, is in conformity with General Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1
1992.
