manualshive.com logo in svg

ARRI L5, User Manual, Page: 23 / 52

Share
Download
ARRI L5 User Manual Download Page 23

Fixture menu

23

• Press the + / [up] or - / [down] button to select the DMX mode. 

Confirm the selected mode with the ENTER button. The DMX 
mode blinks three times for confirmation.

• Press the FUNCT button to leave the menu.

To set the display illumination and status indicators

To switch the display illumination and status indicators on or 
off:
• Press the + / [up] or - / [down] button, until SETUP is displayed 

left in the display.

• Confirm with the ENTER button. Press the + / [up] or - / [down] 

button until INDC is displayed.

• Confirm with the ENTER button. The current setting is

displayed.

• Press the + / [up] or - / [down] button to select the option ON 

or OFF. Confirm the selected mode with the ENTER button.

• Press the FUNCT button to leave the menu.

To read out fixture information

To display fixture information:

Operating hours

• Press the + / [up] or - / [down] button, until STATUS is dis-

played left in the display.

• Confirm with the ENTER button. Press the + / [up] or - / [down] 

button until HOUR is displayed.

• Confirm with the ENTER button. The current operating

hours are displayed (e.g. 501h).

• Press the FUNCT button to leave the menu.

Version of the DMX protocol

To display the version of the DMX protocol:
• Press the + / [up] or - / [down] button, until STATUS is dis-

played left in the display.

• Confirm with the ENTER button. Press the + / [up] or - / [down] 

button until DMXV is displayed.

• Confirm with the ENTER button. The current version is

displayed (e.g. 3.1).

• Press the FUNCT button to leave the menu.

Firmware-version

To display the firmware-version:
• Press the + / [up] or - / [down] button, until STATUS is dis-

played left in the display.

• Confirm with the ENTER button. Press the + / [up] or - / [down] 

button until SW is displayed.

• Confirm with the ENTER button. The current firmware

version is displayed (e.g. 2.0).

Summary of Contents for L5





















































Reviews:

No comments