manualshive.com logo in svg

ARRI L5, User Manual, Page: 20 / 52

Share
Download
ARRI L5 User Manual Download Page 20

Fixture menu

20

DATA (2)

The DATA indicator lights blue, when a valid DMX signal
is detected on the DMX-input.

FUNCT (3)

The FUNCT button has two functions:
• Normal operation: Switches between CCT and HSI

mode (only ARRI L5-C).

• Fixture menu open: Jump UP one menu level.

ENTER (4)

The ENTER button has three functions:
• Normal operation: Activate blinking arrow for calling up

MEM1 or MEM2.

• Fixture menu open: OPEN next menu level, or

• Confirm a setting.

+ / [up] (5)

The + / [up] button navigates the menu or increases a value. 
Press the button long to activate the fast-run feature.

- / [down](6)

The - / [down] button navigates the menu or decreases a value. 
Press the button long to activate the fast-run feature.

INTENSITY (9)

The rotary knob sets the intensity level.

CCT / HUE (10)

The rotary knob sets the color temperature (CCT) or the hue 
(only ARRI L5-C in color mode).

GN / SAT (11)

The rotary knob sets the green/magenta saturation or the color 
saturation (SAT, only ARRI L5-C in color mode).

MEMORY 1 and MEMORY 2 (7 and 8)

Activate or store a memory.
During operation the mode and recent values are displayed. 
On the first menu level the values for INTENSITY, CCT/HUE 
(only ARRI L5-C) and GN/SAT (only ARRI L5-C) can be re-
trieved via the + / [up]/- / [down] buttons. The menu STATUS, 
confirmed with ENTER, calls up the next level which displays 
information on faultless operation and the temperature of the 
light engine. To retrieve values for operating hours, DMX-ver-
sion and
firmware-version, press ENTER to call up the third level. The 
FUNCT button jumps up one menu level.
A detailed overview of the fixture menu is listed in chapter
“Fixture Menu” on page 27.

To set the operation mode (only ARRI L5-C)

Press the FUNCT button to switch from CCT mode to HSI 
mode and vice versa.
IN CCT mode the product generates white light with optimized 
color rendition. In HSI mode the product generates colored 
light. If saturation is set very low, the product generates white 
light, but not with optimized color rendition.

Summary of Contents for L5





















































Reviews:

No comments