ARRI L5, User Manual, Page: 17 / 52

Power
17
Control options
You can set up or control the product with the options listed in
the table below:
Connector Panel
Power
WARNING! For protection from electric shock, always
connect the product electrically to ground (earth)
when connected to AC power. The AC mains power
supply must be fitted with a fuse or circuit breaker
and ground-fault (earth-fault) protection.
IMPORTANT! Ensure that persons do not look at the
light emission aperture when the product is con-
nected to AC power or a battery pack. The product
can light up suddenly. The high intensity of the
ARRI L5 can cause eye irritation or injury when not
respecting the safety distance.
IMPORTANT! Always connect the ARRI L5 direct to
AC power. Do not connect it to a dimmer-system.
Doing so will damage the product.
AC power
The products of the ARRI L5 has an auto-sensing switch-mode
power supply that automatically adapts to AC power
at 90 - 264 V ~, 45 - 65 Hz (nom.).
Before you connect the product to AC power or a battery pack,
check that:
• the dimmer knob at the fixture menu is set to 0%, and
• no DMX signal is present at the DMX-input of the ARRI L5.
Option Control Configuration Information
Fixture menu yes yes page 19
DMX yes no page 25
RDM yes yes page 30
LS Manager no yes page 33
1 Fuse holder
2 AC power in
3 Connector for battery pack
4 DMX input
5 DMX output
6 USB connector
1
3
4
5 6
2