ARRI KK.0037273, Manual

Page: 34 / 44

34
Step 1
22.4
FIZ Controllers Adjustments
• Motor Mode
• Calibration
• Torque
• Speed
Select Menu Select FIZ
22.5
Motor Mode
In the Motor Mode column, the motors can be changed from Position to Speed mode.
Touching the marked area will toggle between Position and
Speed mode.
22.6
Calibration
By Selecting Calibrate , every single cforce mini motor
will be calibrated.
22.7
Speed
In general, the speed of FIZ motors can only be adjusted while
the motor is operating in Speed mode.
Selecting Speed selection will open the speed adjustment
menu.
22.8
Torque
Selecting Torque selection will open the torque adjustment
menu.
Keep the Torque value as low as possible.
This will help to keep the overall power consumption low.
NOTICE
Focus Wheel should be set to Position .
Iris Slider should be set to Position .
Zoom Rocker should be set to Speed.
NOTICE
Green indicates that the motor is calibrated.
Red means that the motor needs to be calibrated.
NOTICE
You can also calibrate the motors by pressing the
calibration knob at the single cforce motor.
NOTICE
When using the LCUBE CUB-2 with broadcast
lenses, calibration is not required .
FIZ Setup