ARRI KK.0037273, Manual

Page: 32 / 44

32
21 Wireless Setup
To operate the listed remote heads wireless, the ERM-2400 or ERM-900 must be
connected to the remote head and the remote control panel and set up in the radio menu.
ERM-2400 Ext. Radio Module 2.4 GHz RXD-TXD Set K2.0033757
ERM-900 Ext. Radio Module 900 MHz RXD-TXD Set K2.0033758
21.1
External Radio Modules ERM-2400 and ERM-900 setup
By connecting the external radio modules ERM-2400 and
ERM-900 via the FS-CAN Bus cable to the remote control
panel and the remote head, the modules will change after an
initial setup automatically into transmitter and receiver mode.
The FS-CAN Bus cable provides data and power to the
external radio modules.
21.2
Range
NOTICE
KK.0037270 SRH-360 Stabilized Remote Head, No Radio, Set, Standard Joystick
KK.0037271 SRH-360 Stabilized Remote Head, No Radio, Set, Microforce Joystick
KK.0037272 SRH-360 Stabilized Remote Head, No Radio, Set, Broadcast Joystick
The listed remote heads are NOT equipped with any wireless radio transmission.
NOTICE
Please read the separate manual of the ERM modules.
NOTICE
The quality and range of the radio connection strongly depends on the general radio
situation on site.
1.
Make sure that you select the correct region in which you operate the device.
2.
Avoid multiple products that use the same frequency or the same channel in the
2.4 GHz bandwidth.
3.
Start first those devices that use fixed frequencies.
Then devices that work with channel hopping.
4.
WiFi transmitters, receivers or networks can strongly influence the quality of the
2.4 GHz connection.
5.
Ask your staff to turn off the "hotspot" function in their mobile phones.
6.
Disable unnecessary, unused WiFi systems, such as routers for example.
7.
Especially non-certified or illegal radio systems, can affect the range of the wireless
connection extremely.
8.
Disable all illegal radio systems.
Wireless Setup