25
15
End Stops On / Off
Indicates whether
End Stops
/ Limits are active or not.
By default, this function is assigned to button
B5
.
The
End Stops values
can be set in the End Stops
menu in the
Main
menu.
15.1
Setting End Stops
Touch
Main
and then
End Stops
will open the
End Stops settings menu.
In the
End Stops
settings menu you can define the
start
and
end
positions
for each axis and activate
or deactivate them individually.
15.2
End Stops On/ Off
Here you can activate the End Stop function
for each axis. Just touch On / Off.
15.3
Current Angle
The green numbers indicate the current positions of
the individual axes.
15.4
To set
Left
/
Top
/
Min
move the head into the desired end
position and touch: Set Left, Set Right, Set Top or Set Bottom.
This will open a sub menu where you can also use
+ and - or the slider for a final fine trim.
Touching OK will store the individual end stop positions.
NOTICE
This Function is only available in Speed Mode.
End Stops
Summary of Contents for KK.0037273
Page 44: ...44 Declaration of Conformity ...
