ARRI IVS 435, Instruction Manual

Page: 81 / 125

T.V. SAFE / TRANSMITTED
11:24:30/03
SUB MENU
> TC TIME ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED
FRAME
COUNTER FILM
EXIT
81
Inser
ter Facilities
6.7 TIME CODE Menu
For all TC- and related functions, the ARRIFLEX 435
must be equipped with a Function Expansion
Module (FEM).
The IVS can insert the film camera’s time code into the video
assist image to create a direct link to the post production.
It is possible to insert time code, which is related to the film
camera speed, e. g. 24 fps or a time code which counts
according to the type of video assist (25 full video frames per
second with PAL or 30 full video frames per second with NTSC).
Like all man readable information, the data is inserted as a
window on the monitor image. The window can be switched
on and off independently. Background, position and
character format can be altered without effecting the settings
of other windows.
The adjustment of the white level of the inserted data, an in-
verse display and a fine adjustment of the vertical position
is described in chapter 6.11
This additional line shows the TC information:
Note: The frame information (the last two digits of the
time code display) is only active if time code is
actually recorded on film. If there is no time code
recording on film because for example the camera
is not running on a time code speed, only the
symbol ”**” is displayed on that position.
• Enter the Time Code Menu from the Main Menu.
All settings are immediately activated by
changing them. Check all settings on the
connected monitor.
11:24:30/03