ARRI IVS 435, Instruction Manual

Page: 107 / 125

SUB MENU
VITC ON
POS.1 10
POS.2 12
> EXIT
SUB MENU
VITC ON
POS.1 10
> POS.2 12
EXIT
107
6.12.3 Position 2
The insertion of VITC can be single or multiple line between
line 6 and 22. If the same lines on position 1 and position
2 are selected, the insertion will be single line, otherwise
multiple line. The value of position 1 can be higher or lower
than that of position 2.
Move the cursor > with the keys and to the line
POS. 2 . By pressing the key the value will be
increased until line 22 is selected. By pressing the key
the value will be decreased until line 6 is reached.
6.12.4 Exit
Return to the main menu using EXIT .
Move the cursor > with the keys and to the line
”EXIT” and press the key or .
Note: Pressing the E
NTER
I
NSERT
-key for more than three
seconds will cause the system to exit the onscreen
programming mode completely, regardless of
which menu is activated, with the exception of
the positioning mode.
Inser
ter Facilities