ARRI IVS 435, Instruction Manual

Page: 20 / 125

S 1 S 2 S 3
S 4
20
d) Make sure that the focus screw (S3) § is in the
middle of its range.
e) To release the optic rotate carefully counter clock wise
until the key is on the other side of the spring and the
optic gets loose. Remove forward.
f) Insert the new lens with the bayonet first into the CCD
optic module. Make sure that the key is aligned with
the key way
§ . Press the lens slightly into the
module and rotate clockwise to the stop. Make sure
that the key is on the right side of the lens securing spring.
g) Reattach the cap at the end of the CCD optic module
h) Mount the CCD optic module back to the view finder
system with the three screws.
i) Put the view finder system back onto the camera and
tighten the three mounting screws.
• key
Setup