manualshive.com logo in svg

ARRI IVS 435, Instruction Manual

Share
Download
ARRI IVS 435 Instruction Manual Download Page 30

MODE

WB

IND

OTD

ATW

MAN

STO

CMP

MGC

ON

FR

ON

MODE

WB

IND

OTD

ATW

MAN

STO

CMP

MGC

ON

FR

ON

MODE

WB

IND

OTD

ATW

MAN

STO

CMP

MGC

ON

FR

ON

30

Standard Video Controls

• White Balance Key

• Auto White Balance selected

5.4 White Balance (WB)

The IVS offers a choice for White Balance between
• an automatic control (ATW),
• a fixed setting of indoor (IND)
• a fixed setting of outdoor (OTD)
• and a full manual control of white balance.

White balance can be adjusted in two different ways. It is
possible to control it using the keyboard on the IVS or
using the on-screen control menu.

5.4.1 Using the Keyboard

By pressing the key WB 

§

, the setting will be

changed from IND, OTD, ATW, to MAN. The next click
on the WB-Key will cause the MAN-LED to blink. Thus, it
is possible to change the red and blue channel using the

,  ,  and   key. The next click on the WB key will

cause the MAN-LED to be constantly on. Another click on
the MAN-LED will lead back to IND. An illuminated LED
shows the selected mode.

Check all settings on the connected monitor.

• Outdoor selected

• Indoor selected

Summary of Contents for IVS 435






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands