manualshive.com logo in svg

ARRI IVS 435, Instruction Manual

Share
Download
ARRI IVS 435 Instruction Manual Download Page 55

SUB MENU

   VID ADJ
   MGC      OFF
 > -VALUE
   WB       MAN
   -RED     30

   EXPOSE   180
   MM- DAT  ON
   Y/C-DAT  ON
   BNC-OUT  VBS
   FR       ON

    INTEREP.ON
   MODE     LIVE
   -STORE
   EXIT

   LINE

   -BLUE    39

0

55

Inser

ter Facilities

6.4.2 Manual Gain increase/decrease

Manual gain increase/decrease is only available
if manual gain control is on.

If manual gain is on, it is possible to adjust the gain
manually.

Move the cursor 

>

 with the keys    and   to the line

-VALUE

. Pressing the key   will increase the gain,

the key   will decrease it.

The range for this is from 

0

 (lowest gain) to 

63

 (highest

gain).

If the key   or   is pressed shortly, the value is changed by
one step, if the keys are pressed longer, the value will
continue to change.

The LED in the keyboard will follow the changes which are
made in this menu and vice versa, if this setting is changed
via the keyboard, the on-screen menu will follow.

Summary of Contents for IVS 435






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands