ARRI ARRIMOTION, User Manual

Page: 126 / 162

ARRIMOTION User’s Guide, 01/2004
Page 126 of 162
parts! These gaskets are made from a special, highly conductive material, and their replacement
with a rubber or silicone substance would lead to problems in operating the ARRIMOTION system.
3a. Attaching Modules
• Slide the first expansion module onto the side of the CCB 1. Make sure that the module slides on
straight.
Never touch the contacts of the connectors between the modules.
Contacts
Four screws to attach expansion modules
• Tighten the four screws on the new module with a straight slow screwdriver 7x1,05mm until you
feel the end stop, then rotate counter-clockwise until the white alignment dot on each screw lines
up with the white dots on the module.
White alignment dots
• Slide the next module onto the first module and attach in the same manner.
• Repeat until all modules are attached.