ARRI ARRIMOTION, User Manual

Page: 43 / 162

ARRIMOTION User’s Guide, 01/2004
Page 43 of 162
3.2. Saving, Loading, Erasing and Renaming Moves
Saving a Move
If you have not saved the move, you can save it after the fact to the digital storage media that is built
into the CCB-1 (either a hard disk or a flash card).
• Push
the File tab to open the File screen.
Push the Save Move button.
• In the Save Move screen, push the big empty
button to name the move.
• In the Move Name screen, use the letter
buttons to enter a move name. If you need
numbers or special symbols, push the button
under the
Clr button.
• Push OK when you are done. Back in the
Save Move screen, you can also enter a
version number for this move by pushing the
button to the right of the word
Version: .
• Push the Save button.
Loading a Move
• Push
the File tab to open the File screen. Push the Load Move button.
• In the Load Move screen the list shows the names and version numbers of all stored moves.
Select the move to load, and push the Load button.