2-23
2.4.17 RM - Register Modify
RM
Usage:
RM reg data
The RM command modifies the contents of the register reg to data. The value for reg is the name of the
register, and the value for data may be a symbol name, or it is converted according to the user defined
radix, normally hexadecimal.
dBUG preserves the registers by storing a copy of the register set in a buffer. The RM command updates
the copy of the register in the buffer. The actual value will not be written to the register until target code
is executed.
Examples:
To change register D0 to contain the value 0x1234, the command is:
rm
D0 1234
