Mini Ankara Twin 4P-Ankara Twin 4P-Mini Arka Twin 4P-Arka Twin 4P
English
05060180 00 03-04-2019
31
25.5
Clean specifi c materials
Material
Remedy
What to avoid
Glass
•
use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
•
immediately remove all traces of
water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
DO NOT
use hot water on cold glass surfaces;
the glass could crack and injure the operator
DO NOT
use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
DO NOT
use dirty cloths
Plasti c
(door seal
profi les)
•
use a cloth soaked in neutral deter-
gent
•
clean with a cloth soaked in clean
water
DO NOT
use waxes, concentrated detergents,
which contain oil, bleach, glass cleaners, abra-
sive detergents or fl ammable fl uids.
Aluminium
•
use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
•
immediately remove all traces of water
or detergent using a dry cloth in order
to prevent marks from forming
DO NOT
use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
DO NOT
use rough or abrasive materials or
metal scrapers that scratch the aluminium
surfaces
DO NOT
use steam cleaning equipment
DO NOT
use dirty cloths
Wood
•
use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
•
immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming
•
before treati ng the enti re surface,
test on a small hidden area and ver-
ify that the cleaner will not damage
the fi nish or colour
DO NOT
use spray cans, acid or alkaline de-
tergents (e.g. bleach), soda or solvents which
could corrode the surfaces
DO NOT
use rough or abrasive materials that
could scratch the surfaces
DO NOT
use steam cleaning equipment
DO NOT
use rough cloths
moderate the use of liquid detergent: overuse
causes seepage and then swelling of the wood
25.6 Clean the stainless steel
Certain situati ons can cause the formati on of rust on the surfaces in steel:
iron remains left on damp surfaces, limestone, chlorine or ammonia based detergents not rinsed
properly, food incrustati ons or residues, salt-saline soluti ons, dry residues of evaporated liquids
Remedy
recent stains and rust:
clean with shampoo or neutral detergents, using a sponge or a rag.
When fi nished, eliminate any detergent residue, rinsing abundantly and thoroughly
drying the surfaces.
old stains and rust:
use chemical substances on the stainless steel that contain 25% of nitric acid or similar
substances.
persistent stains and rust:
sand with a stainless steel brush, wash with detergent and dry thoroughly.
This interventi on may however cause scratches to the surfaces due to the abra-
sive cleaning method.
DO NOT
use hydrochloric acid on stainless steel surfaces
ATTENTION
! Slippery fl oor. Falling.
Remove from the fl oor any items such as sponges, rags, waste of water or detergent.
Carefully clean any residue of detergent or saniti zer.
